AFTER USE
Press the On/Off switch to “
O
” to turn off the machine.
Pull the power plug off from the mains power outlet socket.
Allow the machine cool down for a few minutes.
Quick clean
Wipe all parts with a damp soft cloth, such that coffee grounds and milk residues do not dry on the machine.
Empty the drip tray
The drip tray needs emptying as soon as the red overfill indicator pops up.
Carefully life the drip tray off the espresso machine, remove the draining rack and pour the water into the
sink.
AUTOMATICALLY POWER-OFF FUNCTION
The machine will automatically go in sleep mode if stay idle for too long. All 3 indicators will be off under this
condition, but On/Off switch is still left at “
I
“ position.
Condition for auto-off:
After pressing the On/Off switch and left idle for 29 minutes
After brewing coffee and left idle for 60 seconds
After milk frothing and left idle for 90 seconds
To wake the machine, press either the
Espresso Brewing button
“
” or
steam button
“
”, the
On/Off
indicator
and corresponding function indicator will turn ON again. The machine can start operating.
CLEANING AND MAINTENANCE
DANGER OF BURNING!
The espresso machine becomes hot during operation. Metal parts particularly remain hot
for longer time.
Prior to cleaning, wait until the espresso machine has cooled down completely.
SHORT-CIRCUIT HAZARD!
Water, which has penetrated the housing, may cause a short-circuit. Never immerse the
espresso machine in water or other liquids. Ensure that no water or other liquids enter into
the housing.
Always switch off the machine and pull off the plug mains power before cleaning!
RISK OF DAMAGE!
Improper handling of the espresso machine may result in damage. Do not use any
aggressive detergents, sharp or metallic cleaning implements, such as knives, hard
spatulas and similar. These may damage the surfaces.
1. Clean the filter holder, brewing filter and the drip tray with a little detergent under warm running water
and rinse through with clear water.
2. Pull the metal nozzle off the milk frother and clean it with a little detergent under warm running water.
Rinse it thoroughly with clear water.
3. Wipe the handle and the milk frother with a slightly damp cloth.
4. Let all parts dry before reassembling.
