2. Follow the instructions for BREWING ESPRESSO but do not put any coffee powder into the filter.
3. Let hot water run through the machine into your cup/s for approx. 60 second.
It is also recommended to warm the coffee cups before making espresso, either by rinsing them with little
hot water or place them on storage shelf on the coffee machine.
Empty the pre-heated cup. To warm up more
cups, you can place these on top of the storage
shelf. The cups are kept warm by the operating
heat of the machine.
When pre-heating is completed, you can start
with the espresso or cappuccino preparation.
WARNING: Do not leave the machine unattended during use!
BREWING ESPRESSO
Attach the
filter holder
onto the machine.
Insert small or large brewing filter into the filter
holder. Fill the brewing filter with ground coffee
up to the MAX mark. (see “Filling the Brewing
Filter”)
Insert the holder into the appliance at the
position of “
” mark, make sure the tube
on the funnel aligns with groove in the
appliance. (Fig.1)
Fig.1
Turn anti-clockwise until the handle is
aligned with the “
” mark. (Fig.2)
IMPORTANT! you may need to turn the handle a
little harder to make the holder stop at the right
locking position. This is important to prevent
the holder from ejecting during use due to
steam pressure.
Fig. 2