Anita GARUDAN GF-1107-147 MH, Manual

Page: 7 / 73

ANITA ©
MP02300EN_220518 GF-1107-147 MH 7
B. SECURITY MEASURES AND SECURITY FEATURES
B.1 General safety instructions
-
Read this manual, the operating instructions and the operating instructions
carefully before using the machine. It also lists the machine parameters and
specifies the limits and conditions under which the machine may be used.
- Make sure the ON / OFF button is positioned so that you can use it operatively.
- Under no circumstances place your fingers in the area of the sewing needle.
- Check that the electrical cables are not damaged to avoid injury from touching the
exposed wire. Repair damaged covers immediately or replace with a faultless cover.
- When changing the needle, threading, repairing or any mechanical adjustment and
leaving the machine, switch off the machine with the ON / OFF switch or the main
switch.
- Before cleaning or maintaining the machine, disconnect the power supply by pulling the
plug out of the socket.
- If you will not be working on the machine, switch off the power supply with the main
switch.
- If there is a power failure, turn off the machine with the main power switch.
- Do not modify the machine in any way that could endanger safety.
- If the safety label is damaged, order a new one from our company and place it in its
original place.
- Be careful not to get caught by the moving mechanisms of the machine, especially the
sleeves, loose parts of clothes and hair.
- Do not work on the machine under the influence of alcohol or drugs.
B.2 Safety instructions on delivery
-
Follow the markings on the packaging when unpacking.
- Report any visible damage to the carrier immediately. Check the contents of the
shipment with the order and report any defects to the manufacturer immediately.
Subsequent claims will not be accepted.
B.3 Safety instructions for installation and maintenance
-
Only a trained person should install and start the machine for the first time.
- Only a trained person with Decree No. 50/15 Coll. 6 and higher may intervene in
electrical circuits.
- Make sure that the power supply and its voltage, sizing and protection are such as to
allow a constant supply of energy for reliable machine performance.
- Connect the ground properly.
- It is strictly forbidden to connect all connectors when the machine is switched on. There
is a risk of damage to electrical components and drives.
- If it is necessary to remove one of the covers, switch off the main switch or disconnect
the machine from the power supply with a plug.