Anita GARUDAN GF-1107-147 MH, Manual

Page: 37 / 73

ANITA ©
MP02300EN_220518 GF-1107-147 MH 37
Parameter Parameter function Range
Default
settings
Description
P20
End suture run mode
selection
1-3 1 Not used with GF-1107, applies to other models
P21 Pedal position to start sewing
30-1000
520
Service settings - do not change
P22 Stop pedal position 418
P23 Pedal stroke pedal position 270
P24 Thread cutting pedal position 30-500 130
P25
Stitch alignment for stitching
at the end of 3
0-200 101
Part C suture compensation at the end,
0 → 200 gradual delay
P26
Stitch alignment for stitching
at the end of 4
0-200 151
Part D seam compensation at the end,
0 → 200 gradual delay
P28 Barrier run mode selection 0-3 1
0 : Can be stopped and started at will
1 : Perform the action automatically
2, 3 : Not used with GF-1107, applies to other
models
P29 Trimming stop value 1-45 20
P30 Motor torque during sewing
0-100
0
A higher value means more power, too large a
set value can cause abnormal motor behavior.
P31
Torque force of the motor
when cutting threads
30
P32 Barrier stitch alignment 5 0-200 95
Part A / C barrier compensation,
0 → 200 gradual delay
P33 Barrier stitch alignment 6 0-200 155
Part B / D barrier compensation,
0 → 200 gradual delay
P34
Program sewing mode
selection
A / M AND
A : Program stitching starts automatically when
the pedal is depressed
M : Pedal operated, can be stopped and started
at will
P36
Thread holding function
setting
0-11 5
0 : Function disabled
1-11 : Thread holding force
P37
ejector function /
Thread retainer function
0-11 8
0 : Function disabled
1 : Ejector function on 2-11 :
Hold function on - voltage gradually increases
P38
Thread trimming function
selection
ON / OFF HE
ON : Trimming function on OFF : Trimming
function off
P39
Foot up / down
when the machine is stopped
UP / DN DN
UP : The foot will lift automatically
DN : Foot stays down (pedal operated)
P40
Foot up / down
after cutting
UP / DN DN
UP : The foot will lift automatically after
trimming
DN : Foot stays down (pedal operated)
P41 Number of sewn pieces 0-9999 Display of the number of sewn pieces