Anita GARUDAN GF-1107-147 MH, Manual

Page: 33 / 73

ANITA ©
MP02300EN_220518 GF-1107-147 MH 33
G.3 Using the control panel
Sequence of setting parameters of the selected program:
On the basic display you set the parameters of sewing A, B, C, D, after pressing the key you set the
parameters of the program E, F, after another press then G, H (see graphic icons of individual keys).
Increase the
value
•
Sections A, B, C, D, E, F, G, H: increase the number of stitches set
•
Increase the parameter number when selecting a parameter
•
Increase the value when setting the parameter value
Decrease in
value
•
Sections A, B, C, D, E, F, G, H: decrease the number of stitches set
•
Decrease the parameter number when selecting a parameter
•
Decrease the value when setting the parameter value
Enter
parameters /
return
without
saving
•
With the machine idling, press this key to enter the user parameter
setting mode.
•
To enter the advanced parameter setting mode, turn off the
machine, press and hold the key, then turn on the machine.
Parameter
setting /
confirmation
•
Basic display : used to go to the parameter settings of the selected
program
•
Select user parameter number : confirm parameter number and go
to parameter value setting
•
Setting the value of a user parameter : confirmation of the set value
of the parameter
Initial
suturing
Performs the initial seaming, 1x, resp. 2x here and there.
End suturing Performs the final seaming, 1x, resp. 2x here and there.
Normal
sewing
When the pedal is depressed, the machine starts sewing. When
released, the machine stops. When the heel is fully pushed back, the
machine cuts the thread.