80
05/2008 Rev. 0.6
8.6 Accepting Tokens only
Carry out sections 5.3.3 and 5.3.4 beforehand.
1. Open the service menu
2. Set to TOKEN using menu 2.2 Button settings /
Button 1-12 / Price.
3. Block the €0.05 - €2 coins using the coin mechanism
DIL switches and the table below.
4. The recipe buttons are only activated after a token is
inserted!
Coin
DIL +
DIL
€ 0,05
S1-1
S1-7
€ 0,10
S1-2
S1-8
€ 0,20
S1-3
S2-1
€ 0,50
S1-4
S2-2
€ 1,00
S1-5
S2-3
€ 2,00
S1-6
S2-4
ON = rejected / OFF = accepted
8.7 Cleaning the coin holder
From time to time, the coin mechanism should be
cleaned with a light, damp cloth (lukewarm water
containing a mild cleaning agent).
No further maintenance is necessary.
ATTENTION
● The cloth should not be too wet as any liquid that
gets into the device will damage the printed circuit
board.
● Do not use any solvents or scouring agents that may
damage
the
1. Turn off the device.
2. Take the coin mechanism out of the side panel.
3. Carefully open the coin holder valve (fig. 29A) and
hold it open.
4. Clean the coin holder with a cloth and close the
valve
again.
5. Turn on the device again.
A
Fig. 29
