05/2008 Rev. 0.6
65
DV 1 = 15ml/sec. (Brewer)
DV 4 = 20ml/sec. (Hot water)
DV 2
=
15ml/sec. (Mixer 2)
DV 3 = 15ml/sec. (Mixer 3)
DV 5 = 20ml/sec. (Option Brewer By-pass)
3.6 Calibrating the hot water valves
The Brewer and Mixers are supplied with water by the Dis-
pensing Valves (DV).
In the unlikely event that one of the valves needs replacing, it
should be calibrated to one of the dispensing speeds given in
figure 11 after it has been fitted.
When calibrating valves, use the special
Valve Calibration
menu by opening the
Service Menu
and going to
2.7 Hard-
ware Test / 2.7.2 Calibrating Valves
.
The hot water dispensing valves are accessible by dismantling
the canister plateau behind the ingredients canisters.
4. SOFTWARE
4.1 Memory card
Type: SD
Capacity: 16Mb or bigger
Format: FAT (no FAT32 or NTFS)
4.2 Installing software
The device can easily be installed with new software, which is made available as follows:
● www.Animo.eu / dealer log in: Extranet *
●
By
4.3 Installing a language
The device has four standard languages (NL/GB/D/F).
The device can easily be installed with another language set (if available).
A new language file can be made available as follows:
● www.Animo.eu / dealer log in: Extranet *
●
By
* User manuals, service manuals and software updates can be found on the Extranet section of www.
animo.eu. If you do not have access, please request your personal login code on our website.
Fig. 11
