77
2017/09 Rev. 0.0
OptiFresh (Bean) Touch
EN
Service menu continued ...
Main item
Sub-item
Item
Description
2.11
SD / USB - MENU
LOAD DATA /
SOFTWARE
UPDATE
Memory Card
Memory Card
PERSONAL
SETTINgS
With this menu item
Personal settings
can be loaded into the
machine using an SD / USB memory.
This file contains the (changed) personal settings for the menus;
2.4
Settings / 2.6 Service boiler / 2.13 Additional settings
.
The data file (3Fxxxx00.MDU) must be on the SD / USB memory
Before loading or saving data, place
an empty SD / USB memory in the
designated slot
This is located behind the stainless steel
panel on the inside of the door.
Memory Card
LANgUAgE
With this menu item, a
non-standard language
set can be loaded
into the machine. The data file (xxxxxx.TLF) must be on the SD /
USB memory.
RECIPE
With this menu item
Personal recipes
can be loaded into the
machine using an SD / USB memory.
This file contains the (changed) personal recipes for the menus;
2.01
Quick recipe / 2.02 Button settings / 2.03 Recipe settings
. The
data file (3Fxxxx00.RCU) must be on the SD / USB memory.
COUNTERS
With this menu item
Recipe counters
can be loaded into the ma-
chine using an SD or USB memory.
There must be a data file (3Fxxxx00.CNT) on the SD / USB memory.
This file contains all recipe counters from the
1.03 Recipe counters
Use this function only when, for example, a new Main PC board
must be installed in the machine and the counters must be ‘moved’
from the old board to the new one. Do not misuse this function!
OPERATINg
HOURS
With this menu item
Operating hours
can be loaded into the ma-
chine using an SD / USB memory.
There must be a data file (3Fxxxx00.TMR) on the SD / USB memory.
This files contains all the operating hours from the menu
2.07 Hard
-
ware test / operating hours
.
Use this function only when, for example, a new Main PC board
must be installed in the machine and the counters must be ‘moved’
from the old board to the new one. Do not misuse this function!
MANUAL
SOFTWARE
UPDATE
With this menu item an
Manual software update
can be loaded into
the machine using an SD / USB memory.
Use this function only if you are a experienced and trained engineer.
AUTOMATIC
SOFTWARE
UPDATE
With this menu item an
Automatic software update
can be loaded
into the machine using an SD / USB memory.
Follow the chapter 5.3 Software installation for a step by step
instruction
