5000M Crusader G Upgrade Installation Guide
P/N 70000549B
All rights reserved. Subject to change without notice.
9
14-February-03
Remote Start/Stop (Option) Installation
Objective:
To install a remote start/stop pushbutton station on the console.
Tools:
Small Flat Screwdriver
Kit:
Part Number
Description
33000122
Remote start/stop kit, including preassembled pushbutton
station and a 10-32, 3/8” shoulder bolt, P/N 86100853.
Procedure:
NOTE:
You must complete changes to
Setup Utility
parameters before
you can operate the Remote Start/Stop.
To install the Remote Start/Stop (Option):
1. Locate the Start/Stop pushbutton station and the shoulder bolt,
P/N 86100853.
2. Remove one of the 10-32, black Phillips-head screws on the right side
of the console and replace it with the shoulder bolt.
3. Plug the remote Start/Stop cable into the back of the console at the
START
/
STOP
connector. Refer to
Figure 1, Console Rear Panel
.
4. Hand-tighten both screws on the connector.
5. Mount the pushbutton station on the shoulder bolt.
