5
6
AngelTrax
| 41
G Sensor
PTZ
THIS FEATURE IS NOT USED IN THE TRANSPORTATION/
MOBILE INDUSTRY.
DVR ID
Refer to the Vehicle ID Type and Number Section, page 23, for
further information.
Factory Default
1. From the Sub Menu, select the Factory Default feature (see
Figure 5) using the arrow buttons on the remote, and
press ENTER.
2. Press the plus or minus buttons on the remote to change
the Load Factory Default option from NO to YES (see Figure
6). Press ENTER on the remote to reset all DVR settings
back to the factory default settings.
3. To save your changes and return to the Sub Menu, press the
Menu button on the remote.
Update Code
Sub Menu (Cont.)
CAUTION:
THE UPDATE CODE FEATURE IS FOR
ANGELTRAX PERSONNEL ONLY.
DO NOT ADJUST.
NOTICE:
THIS FEATURE IS NOT APPLICABLE TO
THE MINIMICRO PLUS DVR.
