1
2
AngelTrax
| 30
HDD Setup
HDD REC Mode
1. In the Main Menu list, use the arrow buttons on the remote
to select HDD Setup (see Figure 1), and press ENTER.
2. There are three settings under HDD Setup that may be
adjusted. Settings include: HDD REC Mode, HDD Format
and Auto Format (see Figure 2).
3. The additional options listed under the HDD Setup menu are
informational options only. These include: HDD Information
and CD/DVD RW Information.
4. The two options under HDD Rec Mode are Recycle and
Once. The default setting is Recycle.
5. The Recycle record mode allows the hard drive to
continuously record. The oldest data on the hard drive will
be recorded over when the hard drive is full.
6. The Once record mode allows the hard drive to record
until full.
7. From the HDD Setup menu, select the Recycle option,
located across from HDD Rec Mode, and press ENTER on
the remote.
8. Press the plus or minus buttons on the remote to change
HDD Rec Mode from Recycle to Once.
9. Press the plus or minus buttons on the remote again to
change the record mode back to Recycle.
10. To save your changes and return to the HDD Setup menu,
press the Menu button on the remote.
CAUTION:
It is not suggested that the following settings be adjusted. Settings should be left at their
factory default. Altering these values could result in poor or inaccurate performance.
