- 11 -
3269830_inst_GB_rev.2
ENGLISH
GB
GAS CONNECTION
Important
Those authorised to carry out the connection
operation must have experience acquired and
certifi ed in the specifi c sector, in accordance
with current legislation in the appliance’s in-
stallation country.
The connection must make to the proper
standards and must comply with all the rele-
vant regulations and legislation.
When the connection has been made, before
making the appliance operational, do a gen-
eral inspection to make sure there are no gas
leaks.
To make the connection, connect the mains line
to the appliance’s connection pipe, fi tting a shut-
off tap
(A)
, to allow the gas supply to be cut off
when necessary.
Important
The tap (A), not supplied with the appliance,
must be installed in an easily accessible posi-
tion and its status (on or off ) must be obvious
at a glance.
A
Important
The gas supply pipe must comply with the na-
tional requirements in force and must be peri-
odically examined and replaced if necessary.
CONNECTION OF FUME EXHAUST VENT
Important
Make the connection in compliance with the
relevant legal requirements, using appropri-
ate and recommended materials.
1)
Position the appliance un-
derneath the hood
(A)
(see
diagram).
Important
The gas supply tap (A) must
open automatically when
the fan of the extraction sys-
tem is switched on.
A
A
Connecting to a fan extractor hood
To carry out this operation, proceed as follows.
