2
1) Place the Camera at a minimum of
1 metre away from the cot.
2) Connect the adapter to the Camera and into
an electrical outlet.
Note: Each time you power ON your Camera, the internal thermometer will need to calibrate to ensure
accuracy. This automatic process will take approximately 30 minutes. The colour changing temperature display,
by default, will be turned “OFF”. You may turn this feature “ON” in the settings mode on your Parent Unit.
CAMERA UNIT
Front Side
Speaker
Microphone
Camera
Room
temperature
display
Micro USB
charging port
Rear Side
Magnet for
tabletop stand and
wall mount
POWER ON/OFF
Pairing button
STEP 3 - TURNING ON YOUR MONITOR
3.1 TURNING ON YOUR CAMERA
1
ON
OFF
1) Slide the Camera ON/OFF switch to the ON position.
3.2 TURNING ON YOUR PARENT UNIT
Your Camera and Parent Unit come pre-paired.
1
1) Press and hold the Parent Unit ON/OFF button for 2 seconds
until LCD screen is turned ON. Angelcare’s logo will be shown
for 1 second.
The Camera connection signal strength
icon will appear in the status bar.
5
E
N
247AC_07_Manuel_AC510_ROW_m3.indd 5
2018-03-12 10:47 AM
