5.1 - MENU ACCESS AND CHANGING THE SETTINGS
STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR
The Angelcare
®
monitor can be used with the pre-program factory settings
or you can also customize your settings to your preference.
The MENU settings are accessed by using the MENU button on the Parent Unit.
The MENU functions are in a loop. Each time you press the menu button briefly you
move on to the next MENU function. The MENU functions are in the following order:
PRESS 1 TIME:
‘TIC’, Movement & Sound ........... STEP 5.2 & STEP 5.3
PRESS 2 TIMES: Out of Range ....................... STEP 5.4
PRESS 3 TIMES: Sound Transmission ................. STEP 5.5
PRESS 4 TIMES: Alarm ............................... STEP 5.7
PRESS 5 TIMES: Temperature......................... STEP 5.9
All changes and adjustments
made in the main menu
and sub-menu will not be
activated unless you confirm
them by pressing the
SELECT
button followed by
the
EXIT
button.
NOTE:
By continuing to press the MENU button you will
be continuously moving through the loop. Once
you have selected your preferred settings you
must press SELECT and then EXIT or your changes
will not be saved.
5.2 - SENSOR PAD
SENSOR PAD FUNCTIONS:
‘
TIC’:
Allows you to detect baby’s
movements as well as hear a TIC sound
at each movement. (This function can
ONLY be activated in conjunction with
the Movement Function).
Sound Only:
Allows you to detect
the baby’s sounds ONLY. Movement
detection will be deactivated.
Movement Only:
Allows you to detect the
baby’s movements with the TIC sound.
IMPORTANT
When in MENU or SUB-MENU mode
NO sound, alarm or vibration
on both
units will be emitted from either the
Parent Unit or the Nursery Unit even if
they were activated before pressing the
MENU or SUB-MENU mode.
IMPORTANT
When in MENU or SUB-MENU modes,
sound transmission between Parent
and Nursery Units will be temporarily
deactivated.
106
04mf8_User_guide_AC403_12001_BELGIUM.indd 106
2015-10-05 4:31 PM
