STEP 4 - TURNING ON YOUR MONITOR
1)
Press the Parent Unit
ON/OFF
button
for 2 seconds.
2)
Slide ON the Nursery Unit Power
ON/OFF
button.
NOTE:
The screen of the Parent Unit will show
the channel of transmission (C1 to C8) and
after 5 seconds the room temperature and
function icons.
The connecting process should be done
within 30 seconds. If this sequence is not
completed within 30 seconds you will need
to switch the units off and start again.
CHANNEL SELECTION
1
2
When the Parent Unit is turned
ON and the Nursery Unit is OFF:
• No channel icon will appear
on the screen but the Nursery
Unit icon will blink.
• After 1 minute the Parent Unit
will start to beep. The Parent
Unit will continue to beep
for 5 seconds and then shut
itself off.
1)
Press and hold the select button
to enter the channel mode.
2)
Pressing either the UP or DOWN arrow
will change the channel your monitor
transmits on. (C1 to C8)
3)
Press the select button again
to confirm your channel selection.
NOTE :
If the transmission is not clear, or if you hear
interference sounds, you should change
the channel.
1
2
3
TO SELECT THE CHANNEL:
If there is a lost connection
between the 2 units
(refer to troubleshooting):
• The Out-of-range icon
(if activated) will blink
on the screen and the Parent
Unit will beep.
104
04mf8_User_guide_AC403_12001_BELGIUM.indd 104
2015-10-05 4:31 PM
