TO ACTIVATE THIS FUNCTION:
IMPORTANT
If the Out-of-Range function is activated and you turn the Nursery Unit OFF
the Out-of-Range Alarm will sound and/or vibrate (depending on the alarm mode
chosen). Turn the Nursery Unit ON again to reactivate the link.
1
2
ON
OFF
1)
Press
MENU
button 2 times.
The Out-of-Range Indicator
will blinks.
2)
Using the
UP
and
DOWN
Arrows,
turn the function
ON
or
OFF
.
3)
Press the
SELECT
button and then
EXIT
to confirm your choice.
OUT-OF-RANGE ALARM
• Alarm activates when your two units are not communicating.
• The Parent Unit will emit a double beep every 8 seconds.
• Out of Range Icon will flash on the screen.
The Out-of range Icon will also flash
when channel is being changed or
the unit is reconnecting
TO STOP THE OUT-OF-RANGE ALARM:
Press for 2 seconds
the ON/OFF button
of the Parent Unit
OR
Turn the Nursery
Unit ON
3
5.5 - SOUND TRANSMISSION (VOX)
Your monitor is only ‘Sound Activated’. This means that it will transmit sounds only when it
detects them. It will detect even the softest levels of crying.
To save power, after 10 seconds, the sound transmission will stop if no sound is detected.
Once sound is detected transmission will automatically activate.
TO TEST SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
IF YOU HEAR NO SOUND:
• Check that both units are switched ON.
• Check that both units are plugged into
functioning electrical outlets.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer
to the Nursery Unit.
• Increase the sensivity of the microphone.
IMPORTANT
To avoid feedback (whistling), keep both
units at least 3 meters apart.
109
E
N
04mf8_User_guide_AC403_12001_BELGIUM.indd 109
2015-10-05 4:31 PM
