22
CH0305-F35a
5.3
1
Supply cable
2
Inspection window (optional)
3
U.V. lamp socket (optional)
4
Control panel
5
Interface panel
5.1 Alarm signal electronic thermostat (fig.
8.3)
(stops the equipment when the tempera-
ture exceeds the preset limits)
5.2 DIGITAL IN/OUT connector (fig. 6.10)
connection of auxiliary contact digital
input/output signals (enables custom-
er’s own operations)
5.3 ANALOGIC IN/OUT connector (fig. 6.11)
connection for analogic inputs
(connection for user’s auxiliary probes)
5.4 RS 232/485 IN connector (fig. 6.12)
RS 232 serial (RS 485 on request)
5.5 RS 232/485 OUT connector (fig. 6.13)
RS 232 serial (RS 485 on request)
5.6 Main switch (isolator switch)
6
Port hole
7
Demineralized water tank with inlet pipe
8
Internal shelf
9
Condensate drain
10 Humidification water inlet
11 Test room
12-13 Condensation water pipes
14 Chamber door
15 Handle with lock
16 Lower hatch door
17 Internal air recycling fan
18 Probes
18.1 Capacitive probe: only available on
customer-built machines
(
*
)
19 Internal lamp
20 10A Socket specimen power supply
(optional)
CH0305-F07
CH0305-F06
9
10
13
12
9
10
Machines with air condenser
Machines with water condenser
CH0305-F38
5.1
5.2
5.4
CH0305-F10
5.3
5.5
1
3
5,6
5
6
7
14
15
16
5.4
5.5
(
*
)
N.B.: If this probe is present, it will replace the wet bulb probe and therefore the psychrometric system and gauze no
longer exist. Therefore the following instructions for the latter system can be ignored.
20
