19
HOW TO RAISE AND MOVE WITH A BRIDGE CRANE
Accessories:
textile fibre belts and PVC angle bars.
Weight:
see technical specifications
4.1
PERSONNEL REQUISITES
Personnel in charge of handling the machine need no special requisites (just
remember the type of packaging).
However, we suggest that this is done by someone who is accustomed to using
machines for lifting and transport operations.
4.2
MACHINE CONDITIONS
The machine is normally supplied packed and on a pallet. If the machine is
delivered by our staff, it may be without packaging. Other types of packaging may
be supplied according to the destination and/or customer’s needs.
4.3
EQUIPMENT NEEDED FOR HANDLING
The machine can be raised and moved by a lift truck, bridge crane, crane or other
suitable means with an adequate capacity.
Make sure that the forks do not hit the machine frame.
If it is hit accidentally, check immediately for any damage
and if necessary, contact the manufacturer.
DS1710-010
DS1710-050
DS1710-060
Check that the forks are level and
the load is stable before moving
the machine.
In order to handle the machine, the fol-
lowing rules should be observed:
• Move the machine slowly
• Do not tilt the machine, always keep it in
an upright position
• Always make sure you can control the
machine during handling
Warning:
• Do not turn the machine upside-down
• Do not drag the machine
• Do not shake the machine
How to store the machine
It should be kept in a dry environment with
an ambient temperature ranging from 0
°
÷
40
°
C.
Do not use place the machine in a sling of metal cables or chains as these could damage it.
Never put a sling around a machine without its pallet.
In order to prevent the oil in the compressor from flowing into the refrigerating circuit, only transport,
stock and handle the equipment in an upright position according to the instructions on the packaging.
If the machine is placed on its side, leave it in an upright position for at least 24 hours before switching
on.
Do not place packaged machines one on top of the other and always keep
them in an upright position as indicated by the special arrows marked on
the packaging itself.
4
HANDLING AND REMOVAL OF PACKAGING
40
°
C
0
°
C
4.1
4.2
4.3