Anetic Aid 40080, Instructions For Use Manual

Page: 18 / 20

MDM/992043/10/120121
Page 15
period of one year from the date of purchase from Anetic Aid Ltd or their approved
Distributor. Anetic Aid Ltd will repair or replace, at their discretion, any components
found to be defective or at variance with the manufacturer’s specification within this time
at no cost to the purchaser. The warranty will take effect from the date of purchase,
subject to the purchaser registering the product with Anetic Aid to confirm its receipt,
installation date and product details.
The warranty does not provide cover for breakage or failure due to tampering, misuse,
neglect, accidents, modifications or shipping. The warranty is also void if the product is
not used in accordance with the manufacturer’s instructions or is repaired during the
warranty period by any persons other than Anetic Aid or its appointed agent. No other
expressed or implied warranty is given.
For details of our extended warranty packages please contact Anetic Aid or your
authorised dealer.
14. Disposal of Waste Electrical & Electronic Equipment
This symbol on the products and/or accompanying documents means
that used electrical and electronic products should not be mixed with
general waste.
Disposing of this product correctly will save valuable resources and
prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste
handling. If you are unsure of your national requirements with respect to disposal please
contact your local authority, dealer or supplier for further information.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation. The above information is based on the European waste electrical and
electronic equipment directive 2002/96/EC. Please note the electrically powered AT4
contains a lead acid battery pack which will require to be replaced every two years.