14
Release Date 9 July 2021
Anemoment LLC
Connecting the TSM-PM to Other Anemoment Products
•
USB ADAPTER:
Use the Single-Terminated
blunt-cut cable to connect the TSM-PM to
the USB Adapter. Separate out and strip
3mm of the ends from the
Yellow
,
Blue
,
Red
,
Black
, and
Brown
wires from the blunt-cut
end of the cable.
NOTE: to some eyes the Brown wire appears
mauve or lilac in color. If you find it difficult to
identify the Brown wire because you see two
purple-
ish
wires, the Brown wire is the lighter
“not” rich-violet one.
Open the adapter case and insert the wires into the terminal block holes as follows:
Table 6: TSM-FB to DATA LOGGER SCREW TERMINAL WIRING POSITIONS
C
AUTION
: Because the cable contains 12 wires designed to
accommodate the multi-protocol capable TSM-PM, these color
assignments
do not match
the labels printed on the USB Adapter
circuit board.
A helpful video demonstrating this connection is
available at Anemoment.com/resources/.
•
DATA LOGGER (Circuit Board Only):
Use a Single-Terminated blunt-cut cable to
connect the TSM-PM to the USB Adapter. Separate out and strip 3mm of the ends from
the
Red
,
Brown
,
Blue
,
Yellow
,
Orange
,
and
Black
wires from the blunt-cut end of the
cable.
The screw terminals on the Data Logger are labeled “A” and “B”. Use the “A” terminals
to attach a single TSM-FB. Use both “A” and “B” terminals to attach two TSM-FBs to the
Data Logger board.
Insert each wire into the appropriate screw terminal hole and tighten.
Table 7: TSM-PM DATA LOGGER SCREW TERMINAL WIRING POSITIONS
RED
BROWN
BLUE
YELLOW
ORANGE
BLACK
Single TSM-PM
A3
A4
A5
A6
A7
A8
Second TSM-PM
B3
B4
B5
B6
B7
B8
•
DATA LOGGER (in WEATHER-TIGHT BOX): Connect these items by snapping in
place
the connectors at both ends of a Double-Terminated cable.
1
2
3
4
BROWN
BLUE
YELLOW
RED
&
BLACK
Figure 7: S
EPARATING THE
W
IRES