32
Release Date 9 July 2021
Anemoment LLC
Updating TSM Sensor Firmware
Download the latest Firmware release at Anemoment.com/resources/ and save in the
Download directory. Connect the TSM Sensor that computer. From here, choose a method of
command access. (TeraTerm is offered as the Terminal Emulator example):
If using the
TriSonica User APP_________________
•
In the Settings Tab click “Browse…”
•
Navigate to the downloaded file.
•
Click “Update Software.”
•
The TSM Sensor updates and the new version number will register on screen.
If using
TeraTerm (Terminal Emulator)_____________
•
With the TSM Sensor connected and streaming data, press CTRL+C.
•
Type “
programupdate YES”
•
From the TeraTerm menu select the following: File
Transfer
YModem
Send.
•
Select the file to upload, and press “Enter.”
Updating TSM Sensor Bootloader (New in 2.0)
In the TriSonica Mini program memory are two programs, the TriSonica Sensor application, and
a bootloader. During a reset or power on, the bootloader checks to determine if the sensor
application is valid. If the sensor application is valid the bootloader turns over control to the
sensor application. If the sensor application is not valid, the bootloader presents a command
line interface with a limited set of commands:
help
,
programupdate
,
systemreset
, and
factoryreset
. These commands perform the same functions described in Chapter 5 above.
Version 2.0 of the sensor application has a command to update the bootloader to the current
version. After updating the sensor application, enter the command line and enter the expert
mode with the command “
expert enable
”. Then use the command “
bootloadupdate YES
” to
update the bootloader.
