Anemoment LLC
38
Data Logger 422 User Manual
log
Show or set the logging configuration. Use "help log" for full argument list.
log
[enable|disable|rate <arg>|prefix <arg>|dir <arg>|list]
log
with no arguments displays the current logging settings.
enable - Enable the data logging function
disable - Disable the data logging function
rate -
Set the new log file rate values for rate <arg> are:
qhour - starts a new file on the 15 minute mark
hhour - starts a new file every hour and half-hour
hour - starts a new file every hour
day - starts a new file at 00:00 every day.
week - starts a new file at 00:00 every Sunday.
Note: a new file is started every time the command line interface is
exited.
prefix -
Set the prefix <arg> for generated files.
dir -
Set the root directory <arg> name where files are stored.
missingdata
Show or set the port missing data
configuration
. Use "help serial" for full argument
list.
missingdata
with no arguments displays the missing data settings for all ports.
<port> - serial port for applying arguments. Valid values for <port> are 0 - 2
enable - enable the missing data function for the serial port.
disable - disable the missing data function for the serial port.
last -
use the last good data string as the missing data output.
notlast - do not use the last good data string as the missing data output.
sub -
use <arg> as the substitute string for the missing data output. Spaces are
allowed in <arg>.
nvwrite
Writes parameter data to non-volatile memory
passthru
Show or set the serial pass thru
configuration
. Use "help passthru" for full argument
list.
passthru
[<port> [enable|exit [<char>]
passthru
with no arguments displays the serial passthru settings for all ports.
<port> -
serial port for applying passthru parameter commands.
enable -
enable the serial passthru on the specifed port to communicate
directly with a serial instrument
exit -
shows or sets the exit character for the passthru function. All other
characters with be passed on to the serial instrument. When the
exit character is entered from the console port the passthru session
will exit and control will return to the data logger. Ctrl-D is the
default character.
<char> - key character used as the exit character enter control
characters as ctrl+d or Ctrl+D
pgmupdate - the pgmupdate temporarily disables the exit feature so that a
firmware update can take place over the passthru port. Rebooting
the data logger is required to get out of passthru mode.
programupdate
Starts a ymodem session to download new firmware.
serial
Show or set the serial port configuration. Use "help serial" for full argument list.
serial
[<port> [enable|disable|baud [<baud> [now]]|parity [none|odd|even
[now]]|gps| tagged|untagged|tag <arg>]
serial
with no arguments displays the serial settings for all ports.
<port> - serial port for applying arguments. Valid values for <port> are 1 - 6
enable - enable the serial port to receive data for a serial instrument.
