AIRSLIM [M]
20
5.9
Blades Assembly
The Anemoi AIRSLIM [M] fan has five blades. To assemble the blades, it is necessary to introduce and fix them
to the motor guides.
Use the M6x25 screws, M6 nuts and M6 washer provided by applying a tightening torque of 37Nm as shown in
picture:
No.
Description
1
Blade
2
Screw M6x25 + Washer M6
3
Nut M6 + washer M6
The fan blades should be installed with the concave part at the lower end.
CAUTION!
Tighten the blade screws correctly.
Failure to do so may result in incorrect installation.
Check that there are no objects that can avoid the blades rotation.
Failure to do so may result in equipment
damage.
