AIRSLIM [M]
15
The length of the extension rod can be customized according to the installation requirements between 500, 800,
1000, 1500 y 2000 mm. The variation of the extension rod length allows adjusting installation height of fan.
I
f the extension rod exceeds one meter, winds must be installed to avoid oscillations. The variation of the extension
rod allows adjusting the height at which the fan is installed.
The power cables, control cables and safety cable must pass through the ceiling bracket and through the extension
bar. The power and control cables will exit through the side hole while the safety cable through the bottom. The
following image shows the position of the cables:
¡PRECAUCIÓN!
Ensure that the cables pass correctly through the specific holes and that their length will allow them to
be connected on the control board.
Failure to do so may result in equipment damage.
CAT6 control cable
Power cable
Safety cable
