AIRSLIM [M]
13
5.4
Extension Rod Assembly
CAUTION!
Ensure that power cables, control cables and safety cable pass through the ceiling bracket and through
the extension rod.
Otherwise, the fan will be installed incorrectly.
Ensure to place the rectangular hole of the extension bar on the bottom.
Otherwise, the fan will be installed
incorrectly.
The extension rod is assembled to the ceiling fixation by the Screws M10 x70mm provided by applying a
tightening torque of 37Nm. The extension rod has a rectangular hole in the side. This hole should be in the lower
part closest to the motor.
The following figure shows how to attach the extension rod to the roof anchor.
No.
Description
1
Lock nut M10
2
Screw M10x70mm
3
Extension Rod
