AIRSLIM [M]
17
5.6
Motor Assemby
CAUTION!
Ensure that the cables which pass through the top of the motor are on the same side as the rectangular
window of the extension rod.
Failure to do so may result in equipment damage.
Do not lift the motor weight alone.
Failure to do so may result in serious injury or equipment damage.
The motor is fixed to the extension rod by the Screws M10 x70mm provided by applying a tightening torque of
37Nm.
The cables coming out of the motor must be on the same side as the rectangular window of the extension rod.
The safety cable must pass through the motor through the center.
Due to the weight of the motor, it is recommended that it be raised by two people to avoid personal injury and
damage to the fan.
The following figure shows the motor installation:
CAUTION!
Ensure that the M10 motor/extension screws are correctly fastened.
Failure to do so may result in
equipment damage.
Keep all cables on the same side
Pass the safety cable through
the motor
