AIRSLIM [M]
18
5.7
Safety Cable Installation
The motor box contains a steel safety cable that must be installed to protect the motor from falling once it is
installed. Place the safety cable in a fixed element of the ceiling.
•
If the fan is installed in a concrete ceiling, drill the ceiling and insert a ring that supports the weight of the
fan at to c fro the fan’s ceiling fra e.
•
If the fan is installed in a steel or concrete beam, put the steel safety cable around the beam forming a
closed loop.
In the motor, the safety cable must be clamped with the two plates on the bottom. The cable will pass through
the part that remains open of the plate with the smaller diameter and will be fixed by the larger diameter plate in
the part of the hole. All this will be finally screwed with the M5x16mm screws provided as shown in the following
image:
No.
Description
1
Cafety cable
2
Small plate with opening
3
Large plate with lateral notch
The safety cable must be fixed with the two cable clamps. The ring clamps are included in the motor box.
CAUTION!
Ensure that the safety cable is correctly installed to prevent the fan from falling.
Failure to do so may
result in serious personal injury or death and equipment damage.
Pass the safety cable
through the small plate
