andrews LWH42 Installation Manual, Operation And Maintenance Manual Download

Page: 29 / 64

Flue Terminal

WARNING

Icons warning of risk level:

CAUTION

This symbol warns of hazards which have the immediate poten-
tial to result in severe or lethal personal injury or fire.

Denotes content that may result in personal injury or
property damage if ignored.

15-1. Flue Terminal Installation Manual

FF-100-200
FF-100-400
FF-100-700

Model Numbers:

15-1-1. Included Accessories

Q’ty

Part

Shape

Q’ty

Part

Shape

Tapping Screw

Sleeve

Wing Nut

Wall Flange

Packing (only for products

for wall thicknesses of

370mm to 690mm)

Rounded Wood Screw

Long: 2
Short: 2

Wall Anchor

Prohibited

Be sure
to do

The following accessories are included with the unit. Check for any missing
items before starting installation. (They are all attached to the product body.)

• To operate the water heater properly and safely, comply with this installa-

tion manual and the installation manuals of any other equipment.

• The flue terminal must be installed in accordance with regulation in force.

Directions for Installers

WARNING

• The flue terminal must be installed in accordance with the rules in force.

• Failures and damage caused by erroneous work or work not as instructed in this manual are not

covered by the warranty.

15.

Optional Accessories Guide

For Installers:

Read this installation guide carefully
before carrying out installation.

(L)WH42̲56(25̲32)̲E

05.10.4, 1:34 PM

Summary of Contents for LWH42

































































Search results

Summary of Contents for LWH42

Reviews:

Related manuals for LWH42

Brands by name

Popular brands

andrews LWH42, Installation Manual, Operation And Maintenance Manual

Search results

Summary of Contents for LWH42

Reviews:

Related manuals for LWH42

Brands by name

Popular brands