6
How to use
The appliance can heat milk up to 65°. Heating times are approximate and will
depend upon the type of milk and milk temperature taken from storage.
1.
Choose the correct whisk and attach to the motor drive in the base of the
heating jug. Do not operate the appliance with no whisk in place.
2.
Ensure that the milk level in the heating jug is filled above the minimum level
and below the maximum level for the attachment being used. The top MAX line
is for heating milk, the bottom MAX line is for frothing milk. Do not overfill.
3.
Close the lid and ensure that it is fully sealed.
Please note:
The milk frother will need approximately 2
-
3 minutes between uses
before it can be used again. Allow the thermostat to reset before frothing or
heating more milk. Always rinse and dry between each use to remove the milk
deposits.
Frothing and heating or heating only
•
Once the suitable whisk has been fitted, pour in the desired amount of milk,
ensuring it is above the minimum and below the maximum line for the desired
attachment. (See table on page 5).
•
Ensure that the lid is securely fitted and begin by pressing the ON button. The
blue and red indicators will illuminate. When the milk is frothed or properly
heated, the blue light will automatically switch off. When the red light begins
flashing, it indicates the milk is ready for use.
•
To stop the cycle at any time, press on the ON/OFF button.
Frothing only
This function is ideal for creating cold frothed milk for beverages such as cold
coffees and iced lattes.
•
Select the frothing whisk and attach it to the motor drive.
•
Pour in the desired amount of milk, ensuring it is above the minimum and below
the maximum line for the attachment.
•
Ensure that the lid is securely fitted and begin by pressing the ON button. The
blue indicator will illuminate and the whisk will begin to rotate. When the milk is
frothed the blue light will automatically switch off. When the red light begins
flashing, it indicates the milk is ready for use.
•
To stop the cycle at any time, press on the ON/OFF button.
Please note:
The appliance will not cool the milk.
Please note
: If the blue light begins flashing, there is too much milk in the appliance
and is in danger of malfunctioning. Turn the appliance off at the socket and pour
out the milk until it is at the designated, suitable level.
