8
Appliance functions
Loaf
Select the size of the bread: 500g ,750g,
1000g. After selecting the desired size,
the LCD will display the corresponding
size. Please note the total operation time
may vary with the different loaf size. This
button is not applicable to some
programmes.
Note: Loaf size is only applicable to
functions 1-9 and 16.
Colour
Select Light, Medium or Dark colour for
the crust. This is not applicable for some
programmes, for details refer to the
corresponding programme described in
the section “LOAF”.
Start/Stop.
To start a programme, press the START/
STOP button once. A short beep and
the two dots will flash, signalling the
programme is beginning to start.
All other buttons are inactive during a
programme cycle, apart from the Start/
Stop button and the +/- buttons which
when pressed together can illuminate
the bread pan.
To
cancel
the
programme
during
operation. Press and hold the Start/ Stop
button for approximately three seconds, a
beep will then signal the programme has
initiated the close down procedure.
Pause
After an operation starts you can press
the PAUSE button to pause it at any time.
The operation will be paused but the
setting will be memorized and the
outstanding time will flash on the LCD
screen. Press the PAUSE button again and
the programme will continue. If left for
10 minutes without pressing any button
the programme will continue.
Delay timer- “+” and “-” function
After selecting the Menu function 1-17,
the programme finishing time can be
delayed using the “+” button. To delay
the finishing time please follow the
instructions:
1. Make all your choices regarding loaf,
size and colour—then press the
reser button.
2. The time will now increase by ten
minutes, to re-adjust the time press
the - button accordingly.
3. Press start button. The clock will begin
to count down, but the motor will not
start.
Example:
If your chosen bread maker function
takes 1.43hrs to make a loaf, but you
want to delay making the bread by one
hour, you would to increase the display
time to 2.43hrs.
The maximum amount of time you can
delay the bread maker function is up to