InfiLink 200 Installation Guide
15
above it and each of the other five corresponds to an arm of the star of
Infinet cables extending to and from the InfiLink 200.
The yellow lights indicate data is being transmitted down the RS-232
port or the corresponding arm of the Infinet.
The green lights indicate data is being received from the RS-232 port or
the corresponding arm of the Infinet.
Attaching a Modem to InfiLink 200
You can connect two buildings with the Infinet by having modems at-
tached to InfiLink 200s in each building.
Before you can use special modems to connect Infinet, you must have a
conditioned, clean, dedicated telephone line installed. Contact your
telephone company to install the line.
To connect the modem to the InfiLink 200, connect the RS-232 cable on
the modem to the RS-232 port on the top center of the link.
Follow the modem instructions to set it to the correct mode. Be sure the
baud rates of the InfiLink 200 and modem match the entire network.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
