12
InfiLink 200 Installation Guide
Caution
Be sure to connect all three wires, HOT, NEUTRAL, and GROUND.
Otherwise, the controller could malfunction.
The three screws are labeled HOT NEU GND. The three wires at the
end of your AC cable are black, white, and green. Proceed as follows:
1. Place the green wire under the metal plate behind the bottom screw,
labeled GND.
2. Tighten the screw with a flathead screw driver.
Figure 3 shows the position of the plate, where to place the wire, and
how the screw fits on the plate. You can see how the screw holds
the plate in place once you tighten it.
3. Place the white wire under the metal plate behind the middle screw,
labeled NEU.
4. Tighten the screw with a flathead screw driver.
Figure 3. Metal Plate and Screw for Power Supply Wire
5. Place the black wire under the metal plate behind the top screw,
labeled HOT.
6. Tighten the screw with a flathead screw driver.
Insert Wire Here
Metal Plate
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
