InfiLink 200 Installation Guide
7
Installing the InfiLink 200
Unpacking
Be careful when unpacking the unit to not damage the packaging
material—you must reuse it if you ship the product back for repair.
Parts Required
•
InfiLink 200
•
AC Power Cable
•
Four No. 8 Screws
•
Infinet Cable (twisted pair)
Mounting
Mount the InfiLink 200 as follows:
1. Before you begin, open the InfiLink 200 cabinet. You may find it
easier to mount if you remove the cabinet cover and place it to one
side.
Warning
Never drill holes in the InfiLink 200 cabinet or board. A metal shaving
could easily short circuit the electronics.
2. Place two standard No. 8 screws in position for the two precut
eyelets in the top corners of the enclosure.
Figure 1 shows the location of the eyelets and corner screw holes.
3. Screw the InfiLink 200 to a wall or secure it firmly on a base using
standard No. 8 screws in the screw holes in the lower corners of the
enclosure.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com
