DN:KD-927-SMSY01 V2.0 Operation Guide
6/22
user is encouraged to try to correct the interference by one or more of the following
measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
18.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
19.Attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
SETUP AND OPERATING PROCEDURES
1. LITHIUM BATTERY CHARGING
When LCD twinkles battery symbol
, charge the lithium battery.
The monitor and the cuff, must be disposed of according to local regulations at
the end of their usage.
2. CLOCK AND DATE ADJUSTMENT AND
BLUETOOTH SET
a. If
the Blood Pressure Monitor is
no electricity
, once you charge the lithium battery ,
All display characters are shown for self-test, see picture 2-1. In case of empty
battery , you can press “START/STOP” button or wait for 1 minute to go back to
standby mode , else after 3 seconds ,you can adjust the
clock and date .
b. If the time of the device is already set and need to be
changed ,setting can be reached by pressing the
“START/STOP” button for five seconds in standby mode .
External charger
socket