DN:KD-927-SMSY01 V2.0 Operation Guide
13/22
Picture 7-8 Picture 7-9 Picture 7-10
f. When displaying the oldest result measured, if you press the button”M1”, LCD will
display the average value of all results in the current user , the memory circle starts
again.
g. The monitor will turn off automatically after 30 seconds with no operation or you can
press the button”START/STOP” to turn off the monitor manually.
h. If bluetooth is on, the monitor will
Waiting for
transmission of memory when user
enters the memory
mode at first.
See picture 7-11.The monitor will go
forward automatically after 30 seconds with no operation
or if you press the button”M1”. you can press the
button”START/STOP” to turn off the monitor manually.
Picture 7-11
Note:
Above assume scan user 1 memory, if you want to scan user 2 memory ,you need to press
the
button
“M2” to
go forward
；
8. DELETING MEASUREMENTS FROM THE MEMORY
When the separate measurements is displaying (exclude during displaying all average ),
Press the “M1” button and the “M2” button together for 5 seconds, all results in the current
user will be deleted, then the monitor come to the mode without result. See picture 8-1 &
8-2 . The monitor will turn off automatically after 30 seconds with no operation or you can
press the button ”M1” or
“
START/STOP
”
to turn off the monitor manually.
Note:
Above assume
delete
user 1 memory , i
f you
want to
delete user 2 memory ,you
need to press the button ”M2” to turn off the monitor manually.