Andon KD-927, Operation Manual, Page: 14 / 24

DN:KD-927-SMSY01 V2.0 Operation Guide
12/22
Picture 7-1 Picture 7-2 Picture 7-3
b. Press the “M1” button, LCD will display the average value of all the results which is
measured from 5 o’clock to 9 o’clock in last 7 days in the current user. See picture 7-4.
If no result stored from 5 o’clock to 9 o’clock in last 7 days, LCD will display “0” for
blood pressure and pulse rate. See picture 7-5. At this time ,you can go forward by
pressing “M1” button.
Picture 7-4 Picture 7-5
c. Press the “M1” button again, LCD will display the average value of all the results which
is measured from 18 o’clock to 20 o’clock in last 7 days in the current user. See picture
7-6. If no result stored from 18 o’clock to 20 o’clock in last 7 days, LCD will display “0”
for blood pressure and pulse rate. See picture 7-7. At this time ,you can go forward by
pressing “M1” button.
Picture 7-6 Picture 7-7
d. Press “M1” button again, the most recent result will be displayed with date and time
stamp
，
See picture 7-8. Irregular heartbeat symbol (if any)
、
and blood pressure
classification indicator will blink at the same time. Display HSD positive/negative
symbol. If the monitor has no result stored in the current user, the LCD will display
“0” for blood pressure and pulse rate. See picture 7-9. At this time ,you can go forward
by pressing “M1” button.
e. Press “M1” button again, to review the next result, See picture 7-10. You can review
the results by pressing “M1” button until the oldest result.