DN:KD-927-SMSY01 V2.0 Operation Guide
11/22
Picture 6-3 Picture 6-4
f. After measurement, the backlight will turn off automatically after 10 seconds and
the device will turn off automatically after 3 minutes with no operation.
Alternatively, you can press the
“
START/STOP
”
button to turn off the monitor
manually.
g. During 3 minutes
，
you can change the user,until the
device go to standby mode ( If bluetooth is on, the
monitor can transfer memory to IOS device with
bluetooth 4.0.See picture 6- 5 ) ,the result will be stored
in current user.
h. During inflating the cuff and measurement, you can
press the
“
START/STOP
”
button to turn off the
monitor manually.
Picture 6-5
Note: Please consult a health care professional for interpretation of pressure
measurements.
Resting indicator measurement
i. The most frequent error made when measuring blood pressure is taking the
measurement when not at rest,which means that both the systolic and the
diastolic blood pressures are incorrect in this case. During blood pressure
measurement, the device automatically determines whether the circulatory system
is sufficiently at rest or not.
j.
If the circulatory system is not sufficiently at rest ,the red symbol
is displayed,
else the green symbol
is displayed. If the red symbol
is displayed,the
measurement should be repeated after a period of physical and mental rest.
7. DISPLAYING STORED RESULTS AND
BLUETOOTH
a. In memory Mode, LCD will display the last measurement result at first if bluetooth is off,
See picture 7-1. Press “M1” button, LCD will display the average value of all results in
the current user, See picture 7-2. If no result stored in the current user, LCD will
display “0” for blood pressure and pulse rate. See picture 7-3. At this time ,the monitor
can go forward by pressing “M1” button.