Anderson RBMPRO 2000 Operator'S Manual Download Page 51

Page: 51 / 101

Anderson Group

Self-loading Trailer – Operator's Manual

Option

Description

Opens the general settings for the control screen:

Contrast (

)

Metric or imperial measurements (

)

Colour (

)

Date and time (

)

Displays the state of the sensors. (see "Sensors" on page 69).

Displays the function associated with the option selected in the main menu.

5.2 Loading bales

The RBMPRO 2000 trailer collects bales in the position that the baler placed them on the ground
(vertical or horizontal).

When using the trailer, the loading arm should
never touch the ground. This could damage it or
cause an accident.

NOTE:

Bales should be loaded in automatic mode only. Manual
mode should only be used when automatic mode cannot be
used to complete certain tasks.

See section 5.4.

NOTE:

Make sure the hand brake is not activated before moving
the trailer.

Summary of Contents for RBMPRO 2000






































































































Search results

Summary of Contents for RBMPRO 2000

Reviews:

Related manuals for RBMPRO 2000

Brands by name

Popular brands

Anderson RBMPRO 2000, Operator'S Manual

Search results

Summary of Contents for RBMPRO 2000

Reviews:

Related manuals for RBMPRO 2000

Brands by name

Popular brands