96
Operator's Manual – Self-loading Trailer
Anderson Group
NOTE:
If the axle has a grease retainer, first put the retainer in its housing
(in the correct direction). Make sure it is centred and remains in place
throughout the process of putting the outer race back in.
4. Perform a final check.
Figure 59 — Outer Race
Figure 60 — Inserting New Outer Races
7.8 Maintaining and adjusting the brakes (available as an option)
7.8.1 Checking the brakes when getting started
When getting started and after the first loaded run, check that the brakes are working properly:
l
Check that the actuators and return springs are secured and check the forward and return
travel of the cylinders.
l
Check that the service and parking brakes are working properly.
