36
Operator's Manual – Self-loading Trailer
Anderson Group
NOTE:
If there is no terminal block or COBO plug in the tractor,
connect the power cord directly to the tractor battery using
the provided adapter.
5. Connect the other end of the 12 V power cord to connector A on the control box (Figure 8).
6. Plug connector B on the control box (Figure 8) into the trailer computer.
7. Plug the rear lights into the 7-pin socket on the tractor.
8. Check that the tractor and trailer turn signals correspond to one another.
9. One by one, operate the hydraulic controls that control the width of the conveyors and the
angle of the platform to check that each hose is connected properly.
NOTE:
If you do not have a load-sensing outlet, you can replace
the two 3/4- in. fittings (pressure/return) with standard
1/2-in. fittings. With this configuration, the load- sensing
hose will not be used. Coil it and store it in a suitable place.
Figure 8 — Connecting the Control Box
