English
19
Recalling the Memory Data
Note: This device stores the last 99 measurements in memory.
Recalling the Memory Data
1. Press the
or
button to display a
most recent memory data.
If no data, the memory number, time,
SYS, DIA and PUL is displayed in bar
display. Press the START/STOP button
to carried out the measurement.
2. Each time the button (or the
button to display the data in the
reverse order) is pressed, the memory
data is displayed as follows.
Most recent data (No.n, in the
example, No.35)
The measurement data is displayed.
Last data (No.1)
The measurement data is displayed.
3. After the last data is displayed, press
the button to display the most recent
data.
4.
Press the START/STOP button to
carried out the measurement. The
device will proceed to standby mode
automatically when no operation is
made for a regular time.
When the auscultation measurement is
carried out and was completed, the
device displays the auscultation mark
and measurement results without
displaying a pulse rate as shown in the
figure at the right.
Press or
Most recent data
Systolic
Diastolic
Pulse
Last data (Oldest)
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse
A data at one time previously
