manualshive.com logo in svg

AND UM-211, Instruction Manual

Share
Download
AND UM-211 Instruction Manual Download Page 15

 English 

14

 

The measurement
is started.

Auscultation 
setting mode

Model UM-211 is designed to detect the pulse and to inflate the cuff to a 
systolic pressure level automatically.   
If re-inflation occurs repeatedly, use the following methods. 

 
Measurement with the SET Pressure   

 

During the blood pressure measurement, re-inflation may occur.   
A fixed pressure value can be set to avoid re-inflation.   

 

1.  Press the MODE button to go to the 

pressurization value setting mode. The 
current setting blinks. 

 
 

2. Press 

the  or    button to select a pressure 

value about 30 mmHg or more above your 
expected systolic pressure from the following.   

 

 

AUTO : Automatic pressurization (default value) 

 

  220    : Pressure value of 220 mmHg (fixed) 

 

  250    : Pressure value of 250 mmHg (fixed) 

 

  280    : Pressure value of 280 mmHg (fixed) 

 
 

3.  Press the MODE button to go to the 

auscultation setting mode. 

 

Press the START/STOP button to start the 
measurement. The device will proceed to 
standby mode automatically when no 
operation is made for a regular time. 
The next measurement will be performed 
with the new pressure value. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

or 

START
STOP

Summary of Contents for UM-211





































Reviews:

No comments

Brands by name

Popular brands

Load more brands