manualshive.com logo in svg

AND UM-211, Instruction Manual

Share
Download
AND UM-211 Instruction Manual Download Page 14

 English 

13

 

Operation 

 

Standby mode 

- The device goes into standby mode when the power is turned on, and a 

current room temperature is displayed at the display for diastolic pressure. 

- The device proceeds to standby mode when the START/STOP button is 

pressed and held, or no operation is made for a regular time at all status 
other than blood pressure mode and auscultation mode.   

- Press the 

 

or

 

 

button to read out the memory. 

 

- Press the MODE button to proceed to the pressurization value setting 

mode. 

- Press and hold the MODE button to proceed to the clock setting mode. 
- Press the START/STOP button to start the measurement. 

 

Measurement standby mode 

- The device proceeds to measurement standby mode when the auscultation 

mode is set to OFF at the auscultation setting mode, or the MODE button is 
pressed at the auscultation exhaust speed changing mode, or the 
measurement is stopped. 

- Also, the device proceeds to measurement standby mode when the 

measurement is completed. In this case, the device remains measurement 
results displayed.

 

- Press the 

 

or

 

 

button to read out the memory. 

- Press the MODE button to proceed to the pressurization value setting 

mode. 

- The device proceeds to the standby mode automatically after a regular 

time. 

- Press the START/STOP button to start the measurement.

 

 
 
 
 
 
 
 
 
 
     
 
 
 
 
 
 
 
 
 

Standby mode   Measurement standby mode 

The display defers 
depending on a 
setting.

 

A current temperature 
is displayed.

 

Summary of Contents for UM-211





































Reviews:

No comments

Brands by name

Popular brands

Load more brands