English
17
Transmitting the Memory Data
While the device displays the clock, hold the communication symbol of the
NFC-enabled communication device close to the communication area ( ) of the
device until “
” appears. The memory data transmission is performed. If the
clock of the device is not correct, the clock will be updated at the same time.
Clock
updated
Clock display
Transmission starts
Transmission ends
Clock display
Transmitting the Measurement Data
When the measurement is complete and the device displays the results, hold the
communication symbol of the NFC-enabled communication device close to the
communication area ( ) of the device until “
” appears. The data transmission is
performed. If the clock of the device is not correct, the clock will be updated at the
same time.
Measurement
Transmission starts
Transmission ends
Clock display
data
display
Note: The result display will turn off automatically after one minute. To transmit the
measurement data, initiate the communication within one minute after the
measurement is complete.
Caution on Using the NFC Function
The UA-767NFC has an NFC Forum Type 3 Tag wireless interface module built
in. When the device is used near wireless communication devices which use the
same frequency as that of the device (13.56 MHz) or use its harmonic
frequencies, electromagnetic interference may occur. In that case, turn off the
devices that are not in use, or place the device 1 meter or more away from the
devices.
Data
transmission
Number of data in memory
Data
transmission
Initiate
communication
Initiate
communication
Data
transmission
Initiate
communication
