Advanced Preparations:
• Be familiar with the controls of the range hood by reading through
Range Hood Operations
,
Page 14.
• Place the range hood on a flat, stable surface. Connect the range hood to a designated standard outlet (120-
Volt,60Hz, AC only) and turn on the range hood. Verify all operations of the range hood by referring
to
Range Hood Operations
.
• Place all supplied parts and required hardware on a flat, stable surface and verify the existence of all supplied parts
listed on Page 4.
NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.
• Determine and mark the center line on the ceiling where the range hood will be installed. Make sure there is
proper clearance within the ceiling or wall for exhaust vent.
• Due to the weight and size of this unit, please make sure that the support system or framework being used is stable
and secure in the wall.
• Put a thick, protective covering over counter top, cook top or range to protect from damage or dirt. Remove any
hazardous objects around the area when installing.
If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the
main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE
Preparations:
CAUTION
9
Model #
Aero Island 36
PREPARATION:
Summary of Contents for Aero Island
