20w
halogen
bulb
screw driver
Halogen
light
housing
Halogen
light
cover
Replacing the light bulb:
•
• Make sure the range hood is unplugged or turn OFF breaker.
Place a flat-head screwdriver between light cover and housing to remove cover.
Wear a cotton glove or use a cloth to handle the replacement
bulb (DO NOT handle with bare fingers as this may shorten the life of the bulb). Push gently but
securely into light socket. NOTE: DO NOT push too hard as bulb "legs" may break off.
• Turn ON breaker and range hood to test for operation
This range hood uses halogen bulb: 20W 12V type G4
o
o
Gently pull defective bulb straight out and discard.
o
o
Replace light cover.
17
Model #
Aero Island 36
REPLACING THE BULBS:
.
Summary of Contents for Aero Island
