X-9
Expertly manufactured in Evansville, IN, USA by:
ANCHOR INDUSTRIES INC.
1-800-544-4445 • ph. 1-812-867-2421 • fax 1-812-867-0547 • www.anchorinc.com • e-mail: [email protected]
Interchangeability
Apex
Long Rafter 10’7”
Short Rafter 5’3”
Base Column
Rafter Chart
• Consult the rafter chart above in selecting the components needed for the span
you intend to install. Please note that:
• All spans use (2) base columns and (1) apex. The base column is a male piece
at the upper end. The apex is female on both ends.
• The 30 ft span uses no rafters.
• The 40 ft span uses only a pair of short rafters to complete the beam arch.
• The 50 ft span uses only a pair of long rafters to complete the beam arch.
• The 60 ft span uses both a pair of short rafters and a pair of long rafters
positioned as shown above.
• Male ends of the base column and
all
rafters point toward the apex in
all
spans.
Male ends consist of pre-installed splices protruding from the end of beam section.
We suggest leaving these splices installed during storage of beams.
30’
40’
50’
60’
This color-coded diagram shows the common beam sections shared to allow the
reconfiguration of the 60’ wide unit into the 50’, 40’ and 30’ wide units.
AA
