23
2) SMS Command for Wire sensors code Program
Code Program Process:
A. Confirm what type sensor and which area to be coded program
B. Edit SMS command *1234*CODE*H1#( H area, Smoke detector)and send to AS201E SIMCARD.
C. AS201E siren sound once indicates code pending start, within 20seconds; trigger the sensor, if success
siren ounds twice indicate success. And then start another 20seconds wait for second sensor input,
maximum 5 sensors can be programmed. Any fail, siren will sound BIBiBi and exit code program mode
*
*
1234*ERASECODE#
<Erase all defense area all sensor code>
<Erase signle defense area all sensor code>
1234*ERASECODE*H#
3.18 Daily Travel Mileage SMS report to Driver ( A authorization
Phone No.)
AS201E designed to have a daily travel mileage SMS report to driver at defined time every day.
Configure Mileage Report Time by SMS Command:
*1234*REPTIME:09:36#
<Set Mileage Report Time>
Note:
Please configure AS201E Time zone to be your local time before you setup this.
3.19 OTA firmware
AS201E supports firmware upgrading via GPRS.
If you need upgrade the latest version of firmware , please contact your seller or technical support !
4. APPENDIX
<Available SMS Commands List>
please contact your seller or technical support
to get it .
AS201E Installation Diagram>
please download from our website :<
Download
> .
<
Copyright © 2006-2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
