14
2) Accident Alert for A/B/C Numbers
By configure AS201E installation position and X,Y,Z axils value to setup the accident alert value limit as
trigger conditions. AS201E provides two ways to configure:
-
Configure By SMS commands
*1234*CS*m,x.x,y.y,z.z#
M for the custom direction value (1-6)
x.x corresponding to X axis value (0.0-8.0)
x.y corresponding to Y axis value (0.0-8.0)
x.z corresponding to Z axis value (0.0-8.0)
Note:
Check as following picture which we defined the X,Y,Z direction for the accelerator sensor. And M is the
movement sides serial NO. It can be any one as user self-define. Just make sure it’s the movement facing
side.
-
Configure by Configurator program:
Any axils exceed the configured G value, it will trigger the accident alert.
Copyright © 2006-2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.
