background image

11

2.7 How to insert Simcard to AS201E

3. Functions and Operation

3.1 Arm/Disarm

-

Arm/Disarm:

Arm: In armed status after ARM operation, any illegal events happened in I/O ports or Wireless sensor will trigger
Siren sound and SMS alerts.
Disarm: Opposite to Arm, user is free to do any operation but no alarm alert will be triggered.

-

Re-Arm:

Re-Arm is a function which is automatic arm again if the system was disarmed wrongly by mistakes and kids
press.

-

Trigger condition:

If in Armed status, the system was disarmed, and get no Door open or Ignition status operation within 60 Seconds,
system will automatic arm once.
AS201E system allow user to enable/disarm Re-arm function according user’s usage habit.

-

Re-Arm function Enable/Disarm Method:

Enable SMS command:

*1234*REARMON#

Disable SMS command:

*1234*REARMOFF#

3.2 Alarm Alert functions

In Armed status, any illegal operation which happened in I/O ports and wireless sensor will trigger an alarm
action.
In alarm, the alarm siren will sound for 20seconds, and also send alarm alert via SMS and missed call to preset
phone numbers A/B/C.

Please check following alarm events alert system:

Copyright © 2006-2015 Shenzhen ANB Technology Co., Ltd. All rights reserved.

Summary of Contents for AS201E

























Reviews: